40m 18Gbps Weatherproof HDBaseT Extender

Model: AC-EX40-444-KIT-W

Weatherproof
Tested against UL94, vibration, salt spray and more
Meets military grade spec
Invisible Compression Technology: ICT revolutionized HDMI extension technology implemented into HDBaseT. Bandwidth limitations with 4K signals sent through copper category 5E, 6, and 6A cabling are overcome by our proprietary algorithm.
Extend 4K60 4:4:4 with HDR Signals: HDCP was conceived to assure content holders copy protection for their media. The 19 conductor HDMI format was designed to facilitate this process when transporting media between devices, using a total of 8

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The AC-EX40-444-KIT-W is a weatherproof version of the AC-EX40-444-KIT.

AVPro Edge has brought a nano-technology conformal coating process in-house, and the AC-EX40-444-KIT is the first of our products to receive this revolutionary treatment formulated to protect against failure from liquids, dust, humidity, bacteria, and corrosion.

The formulation completely encapsulates electronic circuitry with an invisible thickness layer from a few tens to a few hundreds of nanometers, allowing penetration into every vulnerable crevice. This thin-film barrier provides complete protection from all forms of moisture, including punishing salt air.

The protection level is rated to IP68, which is exposure to moisture short of full immersion. The coating also boasts non-stick properties, which will repel almost any foreign substance, is anti-bacterial and contributes to corrosion prevention.

Weatherproof
Tested against UL94, vibration, salt spray and more
Meets military grade spec
Invisible Compression Technology: ICT revolutionized HDMI extension technology implemented into HDBaseT. Bandwidth limitations with 4K signals sent through copper category 5E, 6, and 6A cabling are overcome by our proprietary algorithm.
Extend 4K60 4:4:4 with HDR Signals: HDCP was conceived to assure content holders copy protection for their media. The 19 conductor HDMI format was designed to facilitate this process when transporting media between devices, using a total of 8
Downscaling: Scaling circuitry in the transmitter can step down 4K (including HDR metadata) to 1080p for legacy displays, especially useful in mixed resolution systems where native signal resolution is preserved for optimum performance system-wide.
EDID Management: Interoperability issues between displays and problematic AVRs or sources are easily resolved with EDID options available on the kit. EDID bypass and EDID copy simplify troubleshooting.
Distance Capabilities: Transmission distance varies by resolution bandwidth. HD 1080P signals can be sent 70 meters (230’) while 4K resolutions reliably reach 40 meters (115’). For new construction or whenever possible, shielded CAT6A is recommended.
Audio Extraction: Always active on both kit ends, PCM 2 Channel L/R Audio can be extracted from Phoenix connectors and sent to an AVR or distribution amplifier. NOTE: These ports only work if the source is set to output 2 Channel Audio.
On-board Troubleshooting: Leave your Fox & Hound test kit behind in the shop? The AC-EX40-444-KIT has you covered. When required, the transmitter can generate a 1080P or 4K test pattern to aid with wire verification, switcher configuration settings
Control Options: Configurable, bidirectional control for IR & RS-232 signals provides a carefully nuanced added plus to the AC-EX40-444-KIT, consolidating wiring to a solitary pull and mitigating the use of supplemental devices for a clean
Power Requirements: Power over HDBaseT (PoH) allows both devices to be fully powered from a user-selectable, single unit. The individual chassis of the AC-EX40-444-KIT are approximately cell phone-dimensioned, making placement options unlimited.
Includes:
AC-EX40-444-T2 (Transmitter)
AC-EX40-444-R (Receiver)
48V 0.5A Power Supply (One supplied)
1 x IR Tx Unit
1 x IR Rx Unit
4 x 3 Pin Terminal blocks for Audio and RS232 Ports
4 x Mounting Brackets
8 x Screws for Mounting Brackets

HDBaseT - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 123.80 F
Operating Temperature (Minimum): 23 F
Transmission Range: 131 ft
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 12 Watt
Current Draw: 0.50 Amps
DC Voltage: 48 Volts
Depth: 3.62 in
Height: 0.47 in
Shipping Depth (with packaging): 3.60 in
Shipping Height (with packaging): 6.50 in
Shipping Width (with packaging): 8 in
Width: 5.05 in
Product Weight: 0.30 lbs
Shipping Weight: 2 lbs
Color: Black
Video Resolutions: Up to 4K 60Hz 4:4:4
VESA Resolutions: Up to DCI 4K (4096x2160)
HDR formats: HDR10, HDR10+, HDG, Dolby Vision, Low Latency Dolby Vision
Color Space: YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500)
CHROMA SUBSAMPLING: 4:4:4, 4:2:2, 4:2:0 Supported
Color Bit Depth: Up to 16 bit (1080), Up to 12 bit (4K)
Down Scaling: 4K (and HDR) down to 2K
Audio Formats Supported HDMI: PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos
Audio Formats Supported Extracted (2Ch): PCM 2 Ch (No Downmix)
HDBaseT (CAT) Distance (4k): 40m/131Ft (Cat 6a)
HDBaseT (CAT) Distance (Full HD): 70m/230ft (Cat 6a)
HDMI Lead IN/OUT (4k60 4:4:4): Up to 50ft (using Bullet Train HDMI)
HDMI Lead IN/OUT (W/ AOC Cable) (4k60 4:4:4): Up to 130 Feet (using Bullet Train AOC)
Bandwidth: 18 Gbps (W/ ICT)
HDCP: HDCP 2.2 and Earlier (HDCP 2.3 support with this firmware)
HDMI (TX and RX): Type A
Audio (Extracted Analog): 3 pin terminal block (Unbalanced)
IR TX (TX & RX): 3.5mm Mono (2 Conductor)
IR RX (TX & RX): 3.5mm Stereo (3 Conductor)
RS232 (TX & RX): 3-pin terminal block
Power (TX & RX): 2-Pin Terminal Block
Storage Temperature: -4 to 140°F (-20 to 60°C)
Humidity Range: 5-90% RH (No Condensation)

Extender 807797 kb - Data Sheet

Project List