
Single 31-band Graphic Equalizer
Model: 131s
Part #: DBX131SV
- Single 31-band, 1/3-octave constant Q frequency bands
- Switchable boost/cut ranges of +/-6dB or +/-12dB
- 12dB per octave, 3dB down at 50Hz low-cut filter
- Front panel bypass switch
- +/-12 dB input gain range
The 131s graphic equalizer includes a single 31-band channel of 1/3-octave equalization, +/-12dB input gain, switchable +/-6dB or +/-12dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface and output level metering. From its extended 10Hz to 50kHz frequency response and 110dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the 131s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound. The 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.
- Single 31-band, 1/3-octave constant Q frequency bands
- Switchable boost/cut ranges of +/-6dB or +/-12dB
- 12dB per octave, 3dB down at 50Hz low-cut filter
- Front panel bypass switch
- +/-12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS inputs and outputs
- Frequency response of <10Hz to >50kHz
- Dynamic range of greater than 108dB
- Equalizer Type - Graphic Equalizer
- Equalizer Input Connector - 1/4" TRS
- Equalizer Output Connector - 1/4" TRS
- Spec Sheet available - Yes
- Bandwidth (octaves): 0.33
- Depth: 6 in
- Height: 1.75 in
- Width: 19 in
- Product Weight: 4.80 lbs
- Shipping Weight: 6.20 lbs
- Input Connectors: 1/4" TRS, female XLR (pin 2 hot)
- Input Type: Electronically balanced/unbalanced, RF filtered
- Input Impedance: 40 kiloohms (balanced), 20 kiloohms (unbalanced)
- Max Input Level: >+21dBu balanced or unbalanced
- Input CMRR: >40dB, typically >55dB at 1kHz
- Output Connectors: 1/4" TRS, male XLR (pin 2 hot)
- Output Type: Impedance-balanaced/unbalanced, RF filtered
- Output Impedance: 100 Ohms (balanced), 50 Ohms (unbalanced)
- Max Output Level: >+21dBu balanced/unbalanced into 2 kiloohms or greater, >+18dBm balanced/unbalanced (into 600 ohms)
- Bandwidth: 20Hz to 20kHz, +0.5/-1dB
- Frequency Response: <10Hz to >50kHz, +0.5/-3dB
- Dynamic Range: >112 dB (Typical)
- THD+NOISE: <0.003 %
- Operating Voltage: 100 to 120Vac, 50/60Hz
- Power Consumption: 15 W
- Main Connection: IEC receptacle
Suggested Products

Kore Multimedia Solutions
5100 Verde Valley Lane
113
Dallas, TX 75254
USA
(469) 998-1261
https://www.koremmsolutions.com/