
31-band Dual Graphic Equalizer/Limiter with Type V NR and AFS
Series: iEQ
Model: iEQ31
- Advanced feedback suppression (AFSâ„¢)
- Type Vâ„¢ Noise reduction
- PeakStopPlus® limiting
- 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of +6 or +15dB
With an EQ heritage that has produced countless industry-standard patents and dates back more than 30 years, the dbx iEQ-31 easily lives up to the dbx® legacy of uncompromised sonic integrity. In addition to unsurpassed equalization specs, the iEQ-31 also offers the built-in necessities which include AFS™ feedback Suppression, Type V™ noise reduction and PeakStopPlus® limiting. Besides including two 31-band channels of 1/3-octave equalization, the iEQ-31 also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs, nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.<br>The iEQ series represents a major step forward in the performance of graphic equalizers. The iEQ series is now able to offer state-of-the-art digital EQ performance and specs with an analog look and feel. From its amazing 10Hz to 22kHz frequency response, to its 113dB dynamic range and Advanced Feedback Suppression (AFS™), dbx proprietary Type V™ noise reduction and PeakStopPlus® limiting, the iEQ-31 offers out of this world specifications with a down-to-earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the iEQ-31 is destined to take its rightful place in the lineage of great dbx® signal processors that are the professional’s choice in signal processing. With such pristine design and quality, the iEQ-31 offers the maximum sonic flexibility in a straight forward interface and rock-solid construction.
- Advanced feedback suppression (AFSâ„¢)
- Type Vâ„¢ Noise reduction
- PeakStopPlus® limiting
- 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of +6 or +15dB
- 18 dB per octave 40Hz low-cut filter
- +12dB input gain range
- XLR, TRS and Euroblock inputs and outputs
- Internal toroidal transformer
- Dyanmic range of greater than 113dB
- User power up features
- Relay bypass for power failure system protection
- Equalizer Input Connector - 1/4" TRS
- Equalizer Output Connector - 1/4" TRS
- Equalizer Type - Graphic Equalizer
- Spec Sheet available - Yes
- Input Connectors: 1/4" TRS, female XLR (pin 2 hot) and Euroblock
- Input Type: Electronically balanced/unbalanced, RF filtered
- Input Impedance: 40 kiloohms (balanced), 20 kiloohms (unbalanced)
- Maximum Input Level: >+22dBu balanced or unbalanced
- Input CMRR: >40dB, typically >55dB at 1kHz
- Output Connectors: 1/4" TRS, male XLR (pin 2 hot), and Euroblock
- Output Type: Active-balanaced/unbalanced, RF filtered
- Output Impedance: >120 ohms (balanced), >60 ohms (unbalanced)
- Maximum Output Level: >+20dBu balanced/unbalanced into 2k ohm or greater
- Frequency Response: 20Hz to 20kHz, +0.5/0.25dB
- Dynamic Range: >113 dB (A-weighted)
- THD+NOISE: <0.003%, typical at +4dBu, 1kHz
- Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
- Noise Reduction: Up to 10dB of dynamic broadband noise reduction
- Digital Resolution: 24 bits
- Sample Frequency: 48 kHz
- Latency: 2 ms
- Operating Voltage: 120Vac, 60Hz and 220 to 240Vac, 50/60Hz
- Power Consumption: 17 W
- Main Connection: IEC receptacle
- Dynamic Range: >113 dB (A-weighted)
- THD+NOISE: <0.003%, typical at +4dBu, 1kHz
- Dynamic Range: 113 dB
- Impedance: 120 ohm
- Total Harmonic Distortion + Noise (THD+N): 0 %
- AC Voltage: 120 Volts
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 220 Volts
- Active Power: 17 Watt
- Depth: 7.90 in
- Height: 3.50 in
- Width: 19 in
Suggested Products

Kore Multimedia Solutions
5100 Verde Valley Lane
113
Dallas, TX 75254
USA
(469) 998-1261
https://www.koremmsolutions.com/