Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers

Request Quote
All Products
Fire Safety Interface for ZonePRO Devises
Series: ZC
Model: ZC-FIRE
Part #: DBXZCV-FIRE
- Provides either output muting or programmable scene selection ZonePRO devises
- Offers extended utility to the DriveRack and ZonePRO families
- Offers simple yet elegant solutions
- Maximum cable length varies with number of zone controllers
- Use analog DC voltage to provide logic control ranging from zone source selection, volume and muting
Product Info
Tech Specs
Documents
The ZC-FIRE is a dedicated fire safety interface provides either output muting or programmable scene selection upon being triggered by either a relay or control voltage from the fire safety system for the dbx ZonePRO devices. Connection to the fire safety system shall be either through a relay or directly to the control voltage output. The remote device shall have DIP switches allowing identification with connection to the processing device via CAT5 cable on RJ-45 connectors. The device shall be a dbx ZC-FIRE remote controller. The zone controller offer extended utility to the DriveRack and ZonePRO families. The zone controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000ft. The ZC zone controllers offer simple yet elegant solutions to the contractor.
- Provides either output muting or programmable scene selection ZonePRO devises
- Offers extended utility to the DriveRack and ZonePRO families
- Offers simple yet elegant solutions
- Maximum cable length varies with number of zone controllers
- Use analog DC voltage to provide logic control ranging from zone source selection, volume and muting
- Wired with CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000ft
- UL 60065, IEC 60065, EN 55013 and E60065 safety agency certifications
- Spec Sheet available - Yes
- Connectors: (2) RJ-45, (2) 2-pin Phoenix
- Series Wiring: Maximum cable length varies with number of zone controllers (600ft for 3 zone controllers 300ft for 6 zone controllers)
- Parallel Wiring using ZC-BOB: Up to 6 zone controllers (1000ft)
- Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohms/m (Ohm/1000ft) nominal DCR and rated VW-1 or higher
Zone Controllers
832 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Kore Multimedia Solutions
close

Kore Multimedia Solutions
5100 Verde Valley Lane
113
Dallas, TX 75254
USA
(469) 998-1261
https://www.koremmsolutions.com/
Contact in regards to this product:
dbx, Inc.
Model: ZC-FIRE
Request more information from a dealer near you
close
Request more information from a dealer near you