12 inch Speaker, 90x55 Indoor, Black
Model: EVC-1122-95B
- 12-inch, two-way loudspeaker, with 90 x 55 degree constant directivity, rotatable waveguide
- Power rating: 300 W Continuous, (1200 Peak)
- Passive system: 95 dB, 126 dB maximum
- Gland nut cover and stainless steel grille on PI versions
- Optional high quality transformer and patented Automatic Saturation Control (ASC) preserve low end over 70V/100V lines
EVC loudspeakers from Electro-Voice are two-way systems that can be used in a broad range of applications where wide bandwidth, vertical and horizontal directivity control, and high efficiency are required in a compact, cost-effective package. EVC loudspeakers are voiced to complement other EV-Innovation models (EVF, EVH, EVA, and EVU). The high frequency section of EVC loudspeakers comprises a single 1¼-inch pure titanium dome compression driver directly coupled to a rotatable constant directivity waveguide that delivers uniform pattern control and smooth, linear response. The low frequency section employs a high-output woofer that was developed using state-of-the-art, computer aided optimization to provide low distortion, high efficiency, and maximum intelligibility at high sound pressure levels. The passive crossover implements a modified fourth-order design with slopes of 24 dB per octave for smooth off axis response and improved definition through the critical vocal range. The EVC series is an extremely cost-effective solution for many fixed-install applications. The enclosures are constructed of 15-mm plywood and finished with EVCoat for enhanced durability. The loudspeakers have been designed with multiple M10 suspension points as well as attachment points for an optional U-bracket or multi-mount style pan/tilt wall mount. All EVC series loudspeakers accept wire gauges up to 10 AWG (6 mm). The input panel also accepts optional covers with NL4-type connectors or weatherized gland-nuts. For 70V/100V operation, the input panel has an internal landing pad for mounting EV's high-quality TK-150 audio transformer. Adding a TK-150 to the EVC input panel engages EV's patented Automatic Saturation Compensation (ASC), which preserves low frequency performance while presenting a stable load to the amplifier regardless of how many loudspeakers are connected in parallel. An EVC loudspeaker with a transformer installed sounds virtually identical to the same model without a transformer.
- 12-inch, two-way loudspeaker, with 90 x 55 degree constant directivity, rotatable waveguide
- Power rating: 300 W Continuous, (1200 Peak)
- Passive system: 95 dB, 126 dB maximum
- Gland nut cover and stainless steel grille on PI versions
- Optional high quality transformer and patented Automatic Saturation Control (ASC) preserve low end over 70V/100V lines
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 22 kHz
- Maximum Frequency Response (Bandwidth): 22000 Hz
- Minimum Frequency Response (Bandwidth): 70 Hz
- Minimum Frequency Response (Bandwidth): 0.07 kHz
- Impedance: 8 ohm
- Maximum SPL (Sound Pressure Level): 126 dB
- Sensitivity: 95 dB
- Color: Indoor Black
- Sustainability Rating: IP44, IP55
- Certifications: IEC 60529, IP44 PI version: IEC 60529, IP55
- Construction: Plywood
- Finish: EV Coat
- Active Power: 300 Watt
- Peak Power: 1200 Watt
- Depth: 15.79 in
- Height: 24.25 in
- Width: 15.55 in
- Product Weight: 44.75 lbs
- Shipping Weight: 50.04 lbs
- Rec. High-Pass Frequency: 45 Hz
- Passive Crossover Frequency: 1.6 kHz
- Connectors: Dual four-pin 10 AWG Phoenix/Euro Block screw-terminals
- Grille: 18 GA powdercoated steel with rotatable logo
- Suspension: (8) M10 suspension points
Kore Multimedia Solutions
5100 Verde Valley Lane
113
Dallas, TX 75254
USA
(469) 998-1261
https://www.koremmsolutions.com/