Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers



Request Quote
All Products
Dual 4 inch Flush Mount In-Wall Speaker System, 8 OHM, 70V Operation
Model: FM4.2
- Shallow profile, ideal for tight wall or ceiling spaces
- Tuned passive radiator extends bass, enhances performance
- High quality 1-inch titanium dome tweeter
- Full-bandwidth overload protection
- 70 V, 100 V, and 8 ohms operation in the same model for off-the-shelf versatility
Product Info
Tech Specs
Documents
The EVID FM4.2 flush-mounted loudspeaker system from Electro-Voice is a complete two-way in-wall loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 4 inch two-way loudspeaker coupled with a 4 inch passive radiator and an internal line-matching transformer. The loudspeaker features 4 inch low-frequency cone and high-temperature voice-coil assembly along with a 4 inch long excursion passive radiator and titanium coated dome tweeter. The EVID FM4.2 loudspeaker utilizes a crossover network, centered at 3,600 Hz, that provides 16-dB-per-octave tweeter protection outside of its operating range. In addition the EVID FM4.2 features a comprehensive protection circuit to shield the woofer and tweeter drivers from excessive power levels. The EVID FM4.2 utilizes a transformer that offers a selection of 1.75, 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines. The wattage is selected via a convenient switch on the front baffle. The unit can also be operated as an 8-ohm speaker via the same front panel selector switch. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel is constructed from heat resistant ABS. The rear enclosure is constructed from zinc-plated, steel. The rear enclosure provides an optimum internal volume, ensuring extended low-frequency performance. It is constructed from heavy-gauge, rugged steel. The steel rear enclosure was optimized using FEA to virtually eliminate panel resonance. The entire enclosure is less than 4 inch deep providing an easy installation into nearly any tight wall or ceiling space. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker and provides pass through to additional speakers. FM4.2 loudspeakers provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.
- Shallow profile, ideal for tight wall or ceiling spaces
- Tuned passive radiator extends bass, enhances performance
- High quality 1-inch titanium dome tweeter
- Full-bandwidth overload protection
- 70 V, 100 V, and 8 ohms operation in the same model for off-the-shelf versatility
- Front-panel mode/wattage switch
- Fully-sealed enclosure provides superior isolation to protect adjacent rooms
- Secure Phoenix-style pass-through connectors for easy wiring and installation.
- Four point “quick mounting” tabs for fast attachment in any wall cavity
- Can-mounted transformer for enhanced rigidity
- Ribbed back can eliminates flexing
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 70 Hz
- Minimum Frequency Response (Bandwidth): 0.07 kHz
- Construction: ABS
- Coverage Horizontal: 150 degrees
- Coverage Vertical: 150 degrees
- Impedance: 8 ohm
- Maximum SPL (Sound Pressure Level): 110 dB
- Sensitivity: 87 dB
- Active Power: 50 Watt
- Peak Power: 200 Watt
- Depth: 3.76 in
- Height: 13.78 in
- Width: 7.41 in
- Product Weight: 6.39 lbs
- Shipping Weight: 14.99 lbs
- Color: White
- Crossover Frequency: 3.6 kHz
- Rec. Highpass Frequency: 70 Hz
- HF Transducer: 1 in
- LF Transducer: 4 in
- Transformer Taps: 70V: 1.75, 3.75, 7.5, 15, or 30W 100V: 3.75, 7.5, 15, or 30W
- Bypass: 8 ohms nominal
- Connectors: 4 pin phoenix style terminals
- Grille: Perforated powdercoated steel with safety tether
- Mounting System: Integrated toggle anchors
- Support Hardware: Cutout template, Paint Shield
Speaker
1078592 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Kore Multimedia Solutions
close

Kore Multimedia Solutions
5100 Verde Valley Lane
113
Dallas, TX 75254
USA
(469) 998-1261
https://www.koremmsolutions.com/
Contact in regards to this product:
Electro-Voice (Bosch Communications)
Model: FM4.2
Request more information from a dealer near you
close
Request more information from a dealer near you