Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Variable-D Dynamic Microphone
Model: RE27N/D
- Variable-D® N/DYM® dynamic cardioid microphone
- Reduces proximity effect to maintain uniform LF response at any distance
- N/DYM® technology provides wider frequency-response and higher output
- Three switchable filters: one high-frequency, two low-frequency, and an internal blast/wind filter cover
- Internal blast/wind filter cover reduces P-popping, breath sounds, and excessive sibilance.
Product Info
Tech Specs
Related Products
Documents
Accessories
The Electro-Voice RE27N/D is a professional-quality dynamic
cardioid microphone designed for broadcast production
announce and voice-over, high-quality recording and sound
reinforcement applications. The RE27N/D utilizes a
revolutionary neodymium-alloy magnet and a reinforced
diaphragm dome, a combination offering increased sensitivity
(up to 6-dB more output), undistorted output at high sound
pressure levels and an extended high-frequency response.
The exceptional sensitivity of the RE27N/D, excellent transient
response and inherently low noise of the dynamic transducer,
all combine to ensure a superior signal-to-noise ratio, easily
comparable to the finest condenser cardioid microphones. to
further reduce noise, a highly effective hum-bucking coil is
used to attenuate hum from lighting and other sources. The
RE27N/D’s continuously Variable-D‚ design reduces bassboosting
“proximity effect” to maintain a uniform low-frequency
response, up-close or at a distance. Two easily operated bass
roll-off switches, offering a sharp low-frequency cut at 200 Hz
or a gentle roll-off, are available for special situations where
bass attenuation is required. A third switch is available for
reducing the high-frequency treble boost. The true, uniform
cardioid polar pattern of the RE27N/D offers the greatest
rejection at 180° off axis, insuring superior gain-beforefeedback.
An integral blast and wind filter covers each acoustic
opening on the RE27N/D, allowing “close-talk” situations with
no worry of “P-pop,” breath sounds or excessive sibilance.
Part of the filter also shock mounts the internal microphone
transducer, reducing the transfer of vibration from external
sources. This shock-mount system along with the extremely
rugged exterior steel casing allows the RE27N/D to withstand
all the rigors of professional use.
Accordion
Acoustic Strings
Brass
Choir
Guitar Amp
Kick Drum
Snare
Speech
Tom
Woodwinds
- Variable-D® N/DYM® dynamic cardioid microphone
- Reduces proximity effect to maintain uniform LF response at any distance
- N/DYM® technology provides wider frequency-response and higher output
- Three switchable filters: one high-frequency, two low-frequency, and an internal blast/wind filter cover
- Internal blast/wind filter cover reduces P-popping, breath sounds, and excessive sibilance.
- Microphone Applications:
- Spec Sheet available - Yes
- Element: Dynamic
- Polar Pattern: Cardioid
- Impedance, Low-Z balanced: 150 Ohms
- connector type: 3-pin XLR
- Open Circuit Voltage: 3.1 mV/Pascal
- Finish: Satin Nickel
- Case Material: Steel
- Weight Net: 709 g ( 25.01 oz )
- Dimensions (Height X Max Diameter): 217 x 54 mm (8.54" x 2.13")
309A
- Suspension shock mount
Electo-Voice - RE27ND
174 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Kore Multimedia Solutions
close
Kore Multimedia Solutions
5100 Verde Valley Lane
113
Dallas, TX 75254
USA
(469) 998-1261
https://www.koremmsolutions.com/
Contact in regards to this product:
Electro-Voice (Bosch Communications)
Model: RE27N/D
Request more information from a dealer near you
close
Request more information from a dealer near you