12-inch Cardioid Pattern Gooseneck Microphone with XLR Base
Model: RE90P-12
- RF shield provides superior RFI/GSM shielding
- Small size, unobtrusive for podium applications
- Low, 200 ohms output allows long cable runs
- Optional CPSM podium shock mount provides more than 15dB of mechanical shock isolation at 200Hz
- Frequency and cardioid polar response uniform across the range, for natural sound and high resistance to feedback
Gooseneck podium microphones are phantom-powered back-electret miniature condenser gooseneck microphones. The back-electret feature provides greater sensitivity, wider frequency response and superior immunity from handling noise than a diaphragm-electret microphone. It is highly-shielded from RFI/GSM interference and are mechanically designed for quick, easy mounting to a lectern, pulpit or podium equipped with a bulkhead female XLR-type 3-pin receptacle. For permanent installation, optional fixed (FMK flange-mount kit) and shock-mounted (CPSM shock-mount kit) accessories are also available. This is designed for sound reinforcement applications. The frequency response is tailored for full-range sound reproduction with natural sound pick-up optimized for close-up use. The small diameter gooseneck has two supple joints and a rigid center tube.
- RF shield provides superior RFI/GSM shielding
- Small size, unobtrusive for podium applications
- Low, 200 ohms output allows long cable runs
- Optional CPSM podium shock mount provides more than 15dB of mechanical shock isolation at 200Hz
- Frequency and cardioid polar response uniform across the range, for natural sound and high resistance to feedback
- Polar/Pickup Pattern - Cardiod
- Microphone Type - Condenser
- Microphone Type - Electret Condenser
- Microphone Connectivity - Wired
- Spec Sheet available - Yes
- Case Material: Steel
- MIC type: Gooseneck
- connector type: 3-pin XLR
- Dynamic Range: 102 dB (SPL)
- Generation Element: Condenser, back-electret
- Equivalent Noise (A weighted): <28 dB (SPL)
- Sensitivity, Open Circuit Voltage, 1kHz: 4.5 mV/Pa
- Phantom Power Requirements: 9 to 52 VDC
- Current Consumption: <5 mA (with P48 supply)
- Mounting: Male XLR-type 3-pin Connector
- GoosenecK Head Length: 11.05 in
- Maximum Head Diameter: 0.5 in
- Gooseneck Diameter: 0.25 in
- Elect. Module Diameter: 0.79 in
- Connector Diameter: 0.75 in
Kore Multimedia Solutions
5100 Verde Valley Lane
113
Dallas, TX 75254
USA
(469) 998-1261
https://www.koremmsolutions.com/